Configuring Camera Settings | 43
800-22757 - A - 02/2017
Focus and Zoom
Figure 5-6 Motorized Focus and Zoom
Type
Select the Type of Day & Night switching from Electrical and ICR (IR cut
filter removal). Electrical is a software day/night switching option and ICR
is true day/night IR cut filter day/night switching.
Sensitivity
Adjusts the sensitivity threshold at which the camera switches from Color to
Black & White mode. Set to Low, Middle (default), or High.
Note
Available only when
Day & Night
is set to
Auto
.
Delay
Adjusts the delay value of the switch from Color to Black & White mode.
The value ranges from 2 to 10 seconds. The default value is 6 seconds.
Note
Available only when
Day & Night
is set to
Auto
.
Full-screen
Test
Click the button on the bottom left of the video window to begin a
full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Refresh
Click to cancel the current operation and restore the previously saved
operation.
Save Click to save the currently configured customized settings.
Table 5-5 Camera Day & Night Configurations (cont’d)
Parameter Function
To Next Page
Loading...
