www.honeywell.com/security
42 | Performance Series IR 1080p IP PTZ Camera User Guide
Day & Night Settings
Figure 5-5 Camera Setup - Day & Night Window
Full-screen
Test
Click the button on the bottom left of the video window to begin a
full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Refresh
Click to cancel the current operation and restore the previously saved
operation.
Save Click to save the currently configured customized settings.
Table 5-4 Camera White Balance Configurations (cont’d)
Parameter Function
Table 5-5 Camera Day & Night Configurations
Parameter Function
Profile Select from Normal, Day, Night.
Day & Night
Sets the camera color and B/W mode switch. When the Configuration Profile
is set to Normal or Night, then the default is Auto. When the Profile is set to
Day, then the default is Color. See Profile Management on page 47 for more
information about the configuration profiles.
Color: The camera outputs video in color.
Auto: The camera switches from Color to Black & White according to
the scene conditions, such as if the scene is generally bright, or if IR
illumination is required.
Black & White: The camera outputs black and white video.
To Next Page
Loading...
