To Next PageTo Next Page
Need help?Do you have a question about the Honeywell HDZ20HDE and is the answer not in the manual?
General| Series | HDZ |
|---|---|
| Zoom | 20x Optical Zoom |
| Environment | Indoor/Outdoor |
| Two-Way Audio | No |
| Motion Detection | Yes |
| Weather Resistance | IP66 |
| Connectivity | Ethernet |
| Resolution | 1920 x 1080 |
| Housing | IP66 Weatherproof |
| Night Vision | Up to 100 meters |
| Power Source | PoE (Power over Ethernet) |
| Storage | MicroSD card (up to 128GB) |
Identifies the IP PTZ Dome camera series and its variants.
Indicates this is the official user manual for the product.
Emphasizes that installation and servicing should only be done by qualified technicians.
Specifies requirements for electrical safety compliance with power adapters.
Provides comprehensive safety guidelines for installation and operation.
Outlines the chapters and appendixes included in the manual.
Provides a general description of the HDZ Series IP PTZ dome camera features.
Details the physical dimensions of the indoor and outdoor camera models.
Lists parts to check and actions to take before starting camera installation.
Lists optional accessories available for the camera.
Step-by-step guide for assembling the camera unit.
Describes various mounting options like ceiling, wall, and roof.
Instructions for attaching a safety cable during camera installation.
Lists minimum PC system requirements for accessing the camera.
Explains how to locate the camera on the network using device search.
Guides on enabling ActiveX controls for Internet Explorer access.
Procedure for removing the Honeywell Viewer application from a PC.
Instructions to clear temporary internet files for browser performance.
Details on configuring video format settings like resolution and compression.
Instructions for setting video deinterlacing to remove image artifacts.
Configures MJPEG compression quality using the Q factor.
Selects the appropriate OCX protocol for video streaming requirements.
Sets the frame rate for video streams.
Adjusts the audio input and output volume levels.
Details on programming up to 256 preset positions for camera control.
Procedure for deleting a programmed preset point.
Procedure for deleting a programmed mimic tour path.
Step-by-step guide to programming a preset tour path.
Procedure for deleting a programmed preset tour path.
Enables or disables the sector function for defining fields of view.
Enables or disables the camera's automatic home function.
Allows adjustment of the camera's minimum and maximum tilt angles.
Privacy mask settings specific to 1080p PTZ camera models.
Step-by-step guide to creating a privacy mask on the camera.
Instructions for editing the position of a privacy mask.
Procedure for deleting a privacy mask from the camera.
Sets the maximum gain limit for the camera's AE mode.
Configures the camera's exposure mode for optimal video output.
Selects the white balance mode to compensate for light source differences.
Configures image inversion for horizontal and vertical axis reflection.
Enables or disables the on-screen display for directional information.
Allows switching between NTSC and PAL TV system settings.
Restores all factory default settings, including network settings.
Configures settings for sending alarm messages to FTP, email, or HTTP servers.
Sets up email server details for sending alarm notifications.
Selects which alarm input to configure for alarm settings.
Sets the alarm switch, type (open/closed), and schedule.
Configures uploading images to FTP or email servers upon alarm.
Selects a motion detection profile (1-4) for configuration.
Enables or disables motion detection based on profile or schedule.
Adds a motion detection window to the live view screen.
Configures settings to detect and notify about network failures.
Configures periodical events and the interval for image uploads.
Provides an overview of system configuration options.
Allows renaming the camera for system identification.
Configures the camera's internal clock settings.
Procedure for changing the administrator password for security.
Displays the privileges assigned to each user account.
Generates a request for a certificate from a Certificate Authority.
Enables IEEE 802.1X for network access control.
Configures a static IP address for the camera.
Enables PPPoE support for network connection.
Configures DSCP values to prioritize network traffic types.
Guides on installing UPnP components in Windows.
Enables UPnP port forwarding for network device functionality.
Sets up recording to microSDHC card or NAS device.
Sets up schedules for alarm inputs, motion detection, and events.
Manages storage settings for the microSDHC card.
Provides steps to format the microSDHC card.
Configures the network attached storage device for recording.
Manages the list of recorded video files from storage.
Restores camera to factory default settings.
Restores all default settings, including network configurations.
Restores default settings excluding network configurations.
Manages configuration files for backup and restore.
Displays a list of applied configuration settings for the system.
Detailed specifications for HDZ20HD(X) and HDZ20HDE(X) camera models.
Lists the items included in the in-ceiling bracket package.
Step-by-step instructions for installing the in-ceiling bracket.
Instruction for cutting the appropriate hole in the ceiling.
Guidance on installing the ceiling support ring component.
Instructions for attaching the camera to the bracket frame.
Procedure for installing the assembled camera and bracket.
Instructions for attaching the trim ring to the ceiling support.
