Performance Series Network Video Recorder User Guide
214
Table 12-26 Recording Storage Interface
Setting Description
Channel
See the channel numbers, including the maximum number of
channels.
Auto
Select Auto, and the system enables the automatic recording function
as you set it in the Recording Schedule Setup. See Configuring Storage
Schedules on page 73.
Manual
This is the highest priority. Enable the corresponding channel to record
not matter what period was applied in the Recording Setup.
Stop
Stop recording the current channel no matter what recording setup is
applied to that channel.
Start All/Stop All Select the All selections to make the same setting for all channels.
Configuring Advanced Storage Settings
1. Click Advanced under Storage to open the Advanced storage interface.
Figure 12-87 Advanced Storage HDD Interface
2. On the Advanced HDD tab, you can assign names to hard drives and hard drive groups.
3. On the Main Stream, Sub Stream, and Snapshot tabs you can select the hard drive or
hard drive groups to store recorded data from each stream channel or snapshot channel.
Figure 12-88 Advanced Main Stream Interface
4. Click OK to save your settings.
To Next Page
Loading...