Honeywell HEN04121 - Configuring Email Settings; Configuring the IP Filter; Figure 5-35 IP Filter Configuration Interface

Web Operation | 173
800-18160 - A - 06/2014
Configuring the IP Filter
1. Click IP Filter in the Network configuration interface to open the IP Filter configuration
interface.
Figure 5-35 IP Filter Configuration Interface
2. Click to enable Trusted Sites, and only the listed IP addresses can access the current
NVR.
OR
Click to enable Blocked Sites, and the listed IP addresses can not access the current
NVR.
Configuring Email Settings
Click Email in the Network configuration interface to open the Email configuration interface.