GETTING TO KNOW
YOUR COOL MOISTURE
EVAPORATIVE HUMIDIFIER
Invisible moisture
• Evaporative humidifi cation
means you will NOT see
the moisture output.
• With evaporative humidifi cation, a fan pulls
dry air from the room through the saturated
Wicking Filter. Moisture from the Wicking Filter evaporates and is pushed into the room
with the help of the fan.
• Evaporative humidifi cation adjusts moisture output to the amount of moisture the air can
hold. The drier (less humid) the air in the room, the more moisture the humidifi er will add
to the air. An evaporative humidifi er cannot add more moisture to the room than the air can
hold. The amount of moisture the air can hold depends on many factors including relative
humidity level, temperature and size of room.
Instruction Manual
HONEYWELL COOL MOISTURE HUMIDIFIER
MODEL HEV320 SERIES
REPLACEMENT FILTER: HONEYWELL HC-888 SERIES FILTER C
• The ideal indoor humidity level is 40-60%
• Use a Honeywell humidity monitor
(HHM10 or H10C) to check your
humidity level (not included)
• A Wicking Filter is required for this
unit to operate (one included)
• The Wicking Filter will capture minerals from
your water and will help prevent “white dust”
• If you have hard water, you will need to
replace your fi lter more frequently
• See “Caring for your Filter” section for tips
on prolonging the life of your Wicking Filter
Visit www.HoneywellPluggedIn.com
Call 800-477-0457 for questions and information about this humidifi er
Filter Humidity
Level
To Next Page
Need help?
General
