Honeywell HF8CESWK5 User Manual

4EN
INSTALLATION (CONTINUED)
Installation Steps:
Remove the pre-assembled window bracket panel adapter, hose, and hose connector from the package.1.
2.1 2.2 Adjust the window bracket per the width or
height of your window and tighten the screws
with a screwdriver to fix at the desired length.
There is a hole where the hose will be inserted
later. Make sure this hole is not blocked.
Remove the screws from the window kit
and screw in at the specified holes
(shown as below).
Screw
Hole for Window Bracket
Panel Adapter and Hose
26.6", 36.2" to 50"
(67.5 cm, 92 cm to 125 cm)
Indoor
2 screws
Indoor

Honeywell HF8CESWK5 Specifications

General

Type	portable
Color	white
Operating Area Size	350 square feet
Cooling Settings	3
Seasonally Adjusted Cooling Capacity	5500 british thermal units
Heater	no
Fan Speeds	3
Fan Airflow Rate	241 cubic feet per minute
Hose	single
Noise Level	54 decibels adjusted
Remote Control	yes
Timer	yes
Sleeping Mode	yes
Control Type	touchpad
Energy Efficiency	10
Current	11 amperes
Depth	12.2 inches
Height	27.5 inches
Width	12.4 inches
Net Weight	45.2 pounds