R32 SAFETY
Read the instructions carefully before using the appliance.
R32 refrigerant gas complies with UL60335240 / UL603351.
This appliance contains a certain number of grams (see
rating label at the back of the unit) of R32 refrigerant gas. The
maximum refrigerant charge amount is not greater than R32
1.84 kg based on UL60335240.
When defrosting or cleaning, do not use any method other than
those recommended by the manufacturer.
Do not place the appliance in a room with continuous sources
of ignition (e.g. open flame, operating gas appliance, or working
electrical heater).
Do not pierce and do not burn.
Do not perforate any part of the refrigerant circuit.
Refrigerant gas may be odorless.
The appliance must be installed, used, and stored in an area that
is greater than R32 gas: 4 m².
Accumulation of possible refrigerant leaks in an unventilated
room could lead to fire or explosion should the refrigerant come in
contact with electric heaters, stoves, or other sources of ignition.
The appliance must be stored in a way to prevent mechanical
damage and in a well-vented area.
Only individuals authorized by an accredited organization
certifying their competence to handle refrigerants in compliance
with industry legislation should work on the refrigerant circuit.
Servicing shall be performed only as recommended by the
manufacturer.
All working procedures that affect safety means shall only be
carried by competent persons.
Additional warnings for appliances with R32 refrigerant gas.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EN
To Next Page
Loading...
Need help?
General
