Honeywell HN Series - Page 7

4EN
INSTALLATION (CONTINUED)
3. Connect the exhaust hose to the hose connector on back of the unit. Slide-in the hose connector
downwards until it is locked in place.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
Exhaust Hose:
Dia. 5.9" (15 cm)
Length: 10.6" to 59" (27 cm to 150 cm)
o
C
o
F
4. Connect the window bracket to the window bracket panel adapter. Ensure that all connections are
tight and installed properly.
5. Connect the window bracket to the window.
6.
The Portable Air Conditioner is now ready to use.
o
C
o
F
o
C
o
F