www.honeywell.com/security
24 | Performance Series HQA Digital Video Recorder Remote User Guide
Image and Alarm Configuration Panels
Refer to the User Guide or see Configuring Image Settings on page 29 for more information
about Image settings.
Refer to the User Guide or see Alarms on page 97 for more information about Alarms.
Section 4: Viewer Configuration Controls
WAN Login
After you have successfully logged in, you will be in WAN mode. In WAN mode, you can select
different channels and different modes at the bottom of the interface.
Table 1-2 Viewer Configuration Controls
Button Name Description
Video Quality Click to select the video quality. Select either High
quality or Low quality.
Fluency Click to configure the fluency. Select from Fluency
Level 1, Fluency Level 2, Fluency Level 3,
Middle level, Latency Level 1, Latency Level 2,
and Latency Level 3.
Full Screen Click to switch the viewer to show video full screen.
Click Esc (on your PC) to quit full screen.
Vertical
Synchronization
Click to configure vertical synchronization.
Single-channel
Window
Click to switch to single channel viewing.
Mulit-channel
Windows
Click to switch to various multi-channel screen
configurations.
To Next Page
Loading...
