Need help?Do you have a question about the Honeywell HRHT4041 and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Recording Resolution | Up to 1080p |
| Hard Drive Support | 1 SATA HDD |
| Hard Drive Capacity | Up to 6TB |
| Video Compression | H.264 |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Network Interface Speed | 10/100 Mbps |
| USB Interface | USB 2.0 |
| Power Supply | 12V DC |
| Audio Output | 1 channel |
| Network Interface | RJ45 |
| USB Ports | 2 USB 2.0 |
| Remote Viewing | Yes |
Guides through the initial setup process, including password and pattern configuration.
Outlines methods for recovering or resetting the administrator login password.
How to search for and play recorded video files by date and time.
Describes the process of adding and configuring IP cameras to the DVR.
Sets up the DVR's IP address, subnet mask, gateway, and port configurations.
Sets up motion detection regions, sensitivity, and event actions.
Defines schedules for regular, motion detection, and alarm recording.
Manages HDD status, type, formatting, and diagnostic tests.
Enhances network security by managing trusted and blocked IP addresses.
Step-by-step guide for physically installing an additional hard drive in the DVR.
To Next Page
