Need help?Do you have a question about the Honeywell HRHD9+ and is the answer not in the manual?
General| Compression Format | H.264 |
|---|---|
| Network Connectivity | Ethernet |
| Power Supply | 12VDC |
| Video Output | HDMI, VGA |
| Hard Drive Support | 1 SATA HDD |
| Operating System | Embedded Linux |
| Hard Drive Capacity | Up to 6 TB |
| Motion Detection | Yes |
| Remote Viewing | Yes |
Describes the document's structure, chapters, and appendixes.
Lists the key capabilities and functions of the DVR.
Provides a general explanation of the DVR's technology and advantages.
Lists all items included in the DVR package.
Lists tools needed for installation.
Configures the video standard (NTSC or PAL) for the DVR.
Instructions for connecting video inputs to the DVR.
Details how to connect video sources to other devices.
Guides on connecting monitors to the DVR's video outputs.
Instructions for connecting audio sources and outputs.
Details how to connect alarm inputs and ground.
Explains connecting alarm outputs for external devices.
Describes how to connect the alarm reset input.
How to connect RS485 devices for control.
How to connect the DVR to a network via Ethernet.
How to connect USB devices for backup or upgrade.
How to connect external storage via SCSI.
How to connect modems or remote keyboards via RS232.
How to reset the DVR to its original factory settings.
Instructions for connecting the power supply.
Describes the function of each button on the DVR's front panel.
Guides through the first-time setup process, including password entry.
Explains how to use the simplified setup screen for common features.
Provides access to all DVR setup screens.
How to set site name, unit ID, language, and upgrade software.
Instructions on how to update the DVR's firmware.
How to configure the DVR's date, time, and time zone.
Setting up time synchronization with network servers.
How to check the DVR's status and fault conditions.
Displays storage status and S.M.A.R.T. monitoring.
Configuring S.M.A.R.T. monitoring for hard drives.
How to view the DVR's event log.
Procedures for safely shutting down the DVR.
Setting up video, audio, and remote control devices.
Configuring camera inputs, titles, and PTZ settings.
Configuring alarm inputs (NC/NO, titles).
Setting up and configuring the built-in motion detection.
Defining detection zones for motion sensors.
Scheduling alarm outputs for events.
Configuring audio recording and playback settings.
Configuring serial ports for communication.
Setting up recording modes, resolution, and disk full behavior.
Configuring settings for time-lapse recording.
Setting up schedules for time-lapse recording.
Configuring pre-event recording parameters.
Programming DVR reactions to events like sensor, motion, or video loss.
Setting up record actions for alarm inputs.
Setting up alarm out actions for alarm inputs.
Setting up notification actions for alarm inputs.
Setting up record actions for motion detection.
Setting up alarm out actions for motion detection.
Setting up notification actions for motion detection.
Setting up record actions for video loss.
Setting up alarm out actions for video loss.
Setting up notification actions for video loss.
Configuring on-screen display and camera display settings.
Adjusting main monitor display dwell time and sequencing.
Adjusting spot monitor display dwell time and event monitoring.
Configuring LAN connections, passwords, and transfer controls.
Configuring manual, DHCP, or ADSL LAN connections.
Setting up port numbers for RAS related programs.
Configuring modem settings via RS232/RS485.
Configuring DVRNS server and registering the DVR.
Setting up the DVR to contact a computer or pager.
Setting up Administrator and User passwords for system access.
Accessing functions like archive, clip copy, and clearing data.
Setting up automatic or manual video archiving.
Copying video clips to external storage devices.
Steps to power on and initialize the DVR.
How to view live video feeds from cameras.
Entering and using the active cameo display mode.
How to display video in Picture-in-Picture format.
Controlling PTZ cameras, setting presets, and speed.
How to start and manage video recording.
How to record audio along with video.
How to play back recorded video clips.
Describes various buttons for playback: RW, FF, STOP, Camera, DISPLAY, Menu.
Using the shuttle ring for precise playback control.
Using the jog dial for frame-by-frame playback.
Overview of video search functions.
Selecting local or archive storage for searches.
Searching for video by specific date and time.
Searching for video using a calendar interface.
Searching video based on logged events.
Specific steps for preparing USB-IDE hard drives in Windows 2000.
Specific steps for preparing USB-IDE hard drives in Windows 98.
Pinout details for Input/Output connectors.
Pinout details for the RS485 connector.
To Next Page
