Configuration
Rev 3.01 56 Document 900.0258
10/05
Video Loss Event Action (Record) Setup Screen
Use this screen to set the DVR to react to video loss from a camera differently. Each
camera can be assigned a schedule, associated camera, recording speed, video
quality and dwell time.
Figure 3-37 Video Loss Event Action (Record) Setup Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Camera box and then press # . A camera selection screen displays.
Select the camera number you would like to associate with the camera that has
lost video.
Note You can associate multiple cameras with a camera that has
detected a loss of video.
3. Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell Time box and set the length of time you would like to record
for the associated video loss.
To Next Page
Loading...
