Honeywell HRHD9+ - Motion Detector Event Action (Record) Setup Screen

Configuration
Rev 3.01 53 Document 900.0258
10/05
Motion Detector Event Action (Record) Setup Screen
Use this screen to set the DVR to react to motion detection differently. Each camera can
be assigned a schedule, associated camera, recording speed, video quality and dwell
time.
Figure 3-34 Motion Detector Event Action (Record) Setup Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Camera box and then press # . A camera selection screen displays.
Select the camera number you would like to associate with the camera.
Note You can associate multiple cameras with a camera that detects
motion.
3. Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell Time box and set the length of time you would like to record
for the associated motion event.