Configuration
Rev 3.01 43 Document 900.0258
10/05
Audio Setup Screen
Use the Audio Setup screen to set the DVR to record audio when it is recording video.
Highlight Audio in the Device menu (MENU
➤ Device ➤ Audio) and then press # .
The Audio Setup screen displays.
Figure 3-25 Audio Setup Screen
1. Highlight the box beside Audio Recording and then press # . This toggles
between On and Off. When it is On, the DVR also records audio when it is
recording video.
2. Highlight the box beside Mute and then press # . This toggles between On and
Off. When it is On, the DVR will NOT play live or recorded audio.
3. Highlight the box beside Audio In and then press # to toggle between Mic In and
Line In.
Mic In is for an unamplified source.
Line In is for an amplified source.
To save your changes, highlight OK and then press # . Select Cancel to exit the screen
without saving the changes.
Note When the recording speed is set to less than 1 ips, the DVR
cannot guarantee the standard quality audio playback.
To Next Page
Loading...
