Honeywell HRHD9+ - Figure 3-47 LAN (ADSL) Setup

Configuration
Rev 3.01 66 Document 900.0258
10/05
Figure 3-47 LAN (ADSL) Setup
3. On the LAN Setup screen, highlight the box beside ID, then press # . Use the
virtual keyboard that appears to enter the ID for ADSL connection.
4. Highlight the box beside Password and then press # . Use the virtual keyboard to
enter the password for ADSL connection.
Note Entering the ID and Password and then highlighting OK, reads
the current IP Address of the DVR configured by the ADSL
network.