CLEANING AND STORAGE
• Be sure your fan is off.
• Unplug the fan before cleaning.
• This fan does not disassemble.
• Use only a soft cloth to gently wipe
the fan clean.
• DO NOT immerse the fan in water and
never allow water to drip into the motor
housing.
• DO NOT use gasoline, paint thinner or
other chemicals to clean the fan.
• For storage, remove the batteries, clean
the fan carefully as instructed and store
your fan in a cool dry place.
CUSTOMER SERVICE
Questions or Comments
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at:
www.HoneywellPluggedIn.com/fans
Please be sure to specify model number.
NOTE: IF YOU EXPERIENCE A PROBLEM,
PLEASE CONTACT CONSUMER RELATIONS
FIRST OR SEE YOUR WARRANTY. DO NOT
RETURN THE FAN TO THE ORIGINAL PLACE
OF PURCHASE. DO NOT ATTEMPT TO
OPEN THE MOTOR HOUSING YOURSELF,
DOING SO MAY VOID YOUR WARRANTY
AND CAUSE DAMAGE TO THE FAN OR
PERSONAL INJURY.
HOW IT WORKS
1. Insert barrel plug
of USB cable into
connector located
on
rear surface of
the fan or install
4 AA batteries
(not included).
2. If choosing the
USB option, insert
USB plug into the
USB port of your
computer or other
USB-based
charging devices.
3. To operate your fan,
locate the power
button on the front
of the unit. Press the
button to turn the fan
on, press it again to
turn the fan off.
4. If choosing USB
power, this fan can
be used with a
standard USB
Electrical Power
Adapter (120V AC
to USB power
adapter, not
included) that can
be plugged into an
electrical outlet.
not included
To Next Page
Loading...
Need help?
General