EasyManua.ls Logo

Honeywell HTF1220 Series

Honeywell HTF1220 Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
12" OSCILLATING TABLE FAN
Model HTF1220 Series
16" OSCILLATING STAND FAN
Model HSF1630 Series
When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Use this fan only as described in this manual.
Other use not recommended may cause
fire, electric shock or injury to persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, immerse unit, plug or
cord in water or spray with liquids.
4. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Press the OFF button and unplug the fan
from the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first press the
OFF button, grip the plug and pull it from
the wall outlet. NEVER pull by the cord.
8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near an
open flame, cooking or other heating appliance.
10. DO NOT operate the fan with damaged cord or
plug or if the product malfunctions, is dropped
or damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry, level surface.
14. DO NOT hang or mount fan on a wall or ceiling.
15. DO NOT operate if the fan housing is removed
or damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. DO NOT run fan cord under carpeting. DO NOT
cover cord with throw rugs, runners, or similar
coverings. DO NOT route cord under furniture
or appliances. Arrange cord away from traffic
areas and where it will not be tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, DO NOT Use This Fan With
Any Solid-State Speed Control Device.
IMPORTANT
SAFETY INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
Question and Answer IconNeed help?

Do you have a question about the Honeywell HTF1220 Series and is the answer not in the manual?

Honeywell HTF1220 Series Specifications

General IconGeneral
BrandHoneywell
ModelHTF1220 Series
CategoryFan
LanguageEnglish

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for operating the fan, including proper use, handling, and environment.

Electrical Safety and Handling

Instructions to prevent electric shock, safe plug/cord handling, and outlet safety.

Operating Environment and Warnings

Guidelines on avoiding hazardous environments and specific warnings for safe operation.

Fused Safety Plug Information

User Servicing Instructions

Step-by-step guide for replacing the fuse in the safety plug for US models.

HTF1220 Series Assembly and Parts

Base Assembly

Instructions for assembling the fan body into the base for the HTF1220 series.

Blade and Grilles Assembly

Steps for attaching the blade and grilles to the fan head for the HTF1220 series.

Parts Guide

Visual guide and list of components for the HTF1220 series fan.

HSF1630 Series Assembly and Parts

Base Assembly

Instructions for assembling the base and pole for the HSF1630 series.

Blade and Grilles Assembly

Steps for attaching the blade and grilles to the fan head for the HSF1630 series.

Parts Guide

Visual guide and list of components for the HSF1630 series fan.

Fan Operation

Speed Control

How to adjust the fan speed using the control pad button.

Oscillation Control

Instructions on how to enable or disable the fan's oscillation feature.

Tilt Control

How to adjust the fan head's upward or downward angle.

Height Adjustment

Steps to adjust the pole height for the HSF1630 series fan.

Cleaning and Storage

General Cleaning Guidelines

Recommended methods and precautions for cleaning the fan.

Front Grille Removal for Cleaning

Detailed steps for removing the front grille to facilitate thorough cleaning.

Consumer Relations and Warranty

Customer Service Information

Contact details for customer support, including phone, email, and website.

1 Year Limited Warranty

Details of the limited warranty, including coverage, limitations, and customer rights.

Related product manuals