Need help?Do you have a question about the Honeywell IFP-2100 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | IFP-2100 |
| Category | Conference System |
| Language | English |
Describes the fundamental components and architecture of the IFP-2100/ECS system.
Lists compatible devices and accessories for the IFP-2100/ECS system.
Outlines FCC compliance information and requirements for telephone line connections.
Lists UL requirements and restrictions for system installation and operation.
Covers the procedures and considerations for mounting the FACP cabinet.
Details the installation process for the RA-2000 remote annunciator.
Provides instructions for installing the RA-1000 remote annunciator.
Covers the installation steps for the RA-100 remote annunciator.
Explains the installation of the 5815XL SLC loop expander.
Provides instructions for installing the 6815 SLC loop expander.
Details the installation of the 5824 module for printer connectivity.
Covers the installation of the 5880 LED I/O module for driving LEDs.
Explains the installation of the 5865-3 and 5865-4 LED annunciators.
Describes how to configure SBUS modules, including assigning IDs.
Details how to connect telephone lines for system communication.
Explains the use and wiring of Flexput™ circuits for various functions.
Outlines hardware features related to networking multiple panels.
Describes the RFP-2100 panel and its role in networked systems.
Details the wiring requirements for networking panels using the SK-NIC.
Explains the wiring options for the SK-NIC network interface card.
Provides instructions for setting network IDs for each panel using DIP switches.
Explains how to perform network diagnostics like pinging panels.
Details how to program network options and site assignments.
Covers configuration options for reporting to a central station.
Details programming for voice features, including timers and commands.
Explains how to redistribute network options if programming fails.
A summary of network management features and references.
Lists compatible IDP SLC devices and their details.
Lists compatible SK SLC devices and their details.
Lists compatible SD SLC devices and their details.
Lists compatible SWIFT wireless SLC devices.
Specifies the maximum number of SLC devices supported per panel.
Details wiring requirements for SLC devices.
Provides wire sizing guidelines for SD devices using the 5815XL.
Details wire sizing requirements for the 6815 SLC expander.
Specifies wiring requirements for IDP and SK modules.
Shows Class A wiring configurations for 5815XL and 6815.
Explains how to address IDP and SK SLC devices using rotary dials.
Provides wiring instructions for SD detectors.
Details how to address SD detectors and modules.
Covers wiring instructions for wireless gateways.
Details power connections for wireless gateways.
Explains the JumpStart AutoProgramming feature for system setup.
Introduces the concept of mapping events to outputs.
Illustrates mapping LED points across networked panels.
Describes programming using the HFSS software suite.
Details programming the panel using an annunciator.
A quick reference for programming menus and options.
Outlines programming requirements mandated by UL 864 and UL 2572 standards.
Lists available modules for programming and their edit options.
Covers zone configuration, including naming and properties.
Details output group configuration, including naming and properties.
Covers programming individual input/output points.
Details point programming for the 6815 module.
Explains point programming for power modules like RPS-1000.
Covers point programming for 5880 and 5865 modules.
Details point programming for the 5496 module.
Explains point programming for ECS-AMP modules.
Covers point programming for ECS voice modules.
Covers various system-wide configuration options.
Allows adjustment of detector sensitivity based on time of day.
Enables designation of holidays for specific system behavior.
Configuration for various time-based options like delays and resounds.
Configures miscellaneous options like strobe synchronization and auto display.
Manages automatic adjustments for Daylight Saving Time.
Allows customization of the panel's banner message.
Configures the SLC device family (IDP, SK, or SD).
Details how to run JumpStart for automatic system configuration.
Explains how to restore the panel to factory default settings.
Covers VCM maintenance and voice settings.
Lists the default user and installer access codes.
Describes the components and functionality of the control panel annunciator.
Explains how to navigate the system's menu structure.
Covers fundamental system operations like setting time and disabling points.
Explains how to check detector sensitivity compliance.
Describes how to view the status of individual points.
How to view active alarms or troubles on the system.
Accesses panel information, firmware updates, and feature activation.
Explains how the system prioritizes events when multiple are active.
Details rules governing event priority levels.
Discusses additional factors affecting event priority.
Describes how the panel behaves in different operational modes.
Covers operation of multi-site annunciators and user access.
Details system setup for releasing operations like interlocks.
Explains the smoke alarm verification cycle.
Describes the functionality and macro capabilities of function keys.
Provides an overview of the ECS features and Mass Notification requirements.
Details the functionality of Local Operating Consoles (LOCs).
Explains how to gain ECS control, covering priority and lockout.
Details manual ECS operation modes like Message and Microphone.
Describes using the microphone to distribute audio.
How to select and play messages using ECS message keys.
Steps to generate custom ECS events with live microphone input.
Procedures for passing ECS control between LOCs.
How to exit the ECS Control interface.
Steps to relinquish ECS control.
How to perform an ECS system reset.
Information about the ECS Super User role and privileges.
Explains how ECS input points trigger events and activate outputs.
Covers adding and editing amplifier settings.
Details LOC programming options, including priority and association.
Explains microphone functionality and its use for paging.
Details the configuration steps for network paging.
Lists compatible receivers for central station reporting.
Details SIA reporting format and event codes for IFP-2100/ECS.
Describes the SIA panel communicator event format.
Offers suggestions for resolving hardware problems.
Lists common issues and their potential causes or solutions.
Recommends a schedule for system inspection and maintenance.
Explains how to track or recall trouble conditions using event history.
Covers the panel's integrated testing and troubleshooting tools.
Details how to use the SLC device locator to find devices on a loop.
Explains how to locate multiple SLC devices simultaneously.
Allows toggling outputs and tripping inputs for testing.
Provides earth fault resistance values for terminal detection.
Template for recording detector and module points installed on the SLC loop.
Chart for tracking configured conventional output points (circuits).
Lists compatible notification appliances, indicating SYNC capabilities.
Lists compatible two-wire smoke detectors and their loop limits.
Lists compatible UL-listed four-wire smoke detectors and their current ratings.
Lists compatible UL-listed door holders and their current requirements.
Lists compatible UL-listed relays and their current specifications.
Lists compatible 520Hz speakers.
Lists compatible low-frequency bases for sounders.
Provides guidance on editing text using the programmer's character table.
Demonstrates the process of editing names using the panel's interface.
Lists available cadence patterns for notification appliances.
Shows the relationship between receiver numbers and panel numbers for reporting.
Outlines security tasks for panel installation and maintenance.
Details the manufacturer's warranty terms and limitations.
Procedure for silencing alarms and troubles on the panel.
Steps to reset the fire system or emergency communication system.
How to view active alarms or troubles on the system.
Describes how to view the status of individual points.
Instructions for initiating and ending a fire drill.
Procedure for setting the system's time and date.
Steps to enable or disable individual points on the system.
Procedure for silencing alarms and troubles on the panel.
Steps to reset the fire system or emergency communication system.
How to view active alarms, troubles, and supervisory signals.
Describes how to view the status of individual points.
Instructions for initiating and ending a fire drill.
Procedure for setting the system's time and date.
Steps to enable or disable individual points on the system.
Procedure for gaining ECS control at an LOC.
To Next Page
