Need help?Do you have a question about the Honeywell RFP-2100 and is the answer not in the manual?
General| RF Power Output | 10mW |
|---|---|
| Modulation | FM |
| Type | Wireless Conference System |
| Connector | XLR |
| Battery Type | AA Alkaline |
Outlines general and specific requirements for UL installations, including restricted options.
Guides on selecting a suitable location and mounting the IFP-2100/ECS cabinet, including dimensions.
Covers battery requirements, connection procedures, and accessory cabinets for the control panel.
Provides information on calculating SBUS wire distances and types of wiring configurations.
Explains how to set the network ID for each panel using DIP switch positions.
Details network programming options, including learning networks and managing access codes.
Details wire sizing requirements for SD devices on the 5815XL, including maximum wiring resistance.
Explains how to address IDP or SK SLC devices using the rotary dials on the device board.
Explains how JumpStart AutoProgramming determines input point numbers and types for SLC loops.
Details how to enter and exit panel programming mode using the system annunciator.
Lists programming requirements and limitations for UL 864 and UL 2572 compliance.
Explains how to edit, add, and delete system modules.
To Next Page
