Honeywell JetWave - User Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
Page 4-107
3 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-15-29
Figure 4-34. (Sheet 2 of 10) JetWave™ System Interconnect Diagram - TMA (90400189-0001, REV D)
Draft as of 31 May 2017

Honeywell JetWave Specifications

General

Brand	Honeywell
Model	JetWave
Category	Conference System
Language	English

Summary

Modem Manager (MODMAN) Specifications

MODMAN Connector and Mounting

Details ARINC 600 connector, inserts, and LRU mounting.

KRFU Unit Specifications

KRFU RF Waveguide and IF Interfaces

Specifies WR28/WR42 waveguides and TNC connectors for RF and IF signals.

Bulkhead Interface Requirements

KANDU Bulkhead Connectors

Recommends bulkhead connectors for KANDU control and power connections.

OAE-TMA Unit Specifications

OAE-TMA Receptacles

Details MIL-DTL-38999 and waveguide receptacles for OAE-TMA.

Cabling and Wire Size Recommendations

Cabling Standards and Wire Types

Specifies adherence to SAE AS50881 and wire type recommendations.

GXA System Power and Signal Specs

GXA Power, Discretes, and APM Specs

Details GXA power, discrete specs, and APM operational parameters.

KANDU Unit Continued Specifications

KANDU Receptacles and Max Parameters

Details KANDU receptacles and max resistance/power.

KRFU Unit Continued Specifications

KRFU Receptacles, Interfaces, and Cooling

Details KRFU receptacles, interfaces, and cooling requirements.

Bulkhead Interface Continued Specs

KANDU Bulkhead Connectors

Recommends bulkhead connectors for KANDU control and power.

OAE-FMA Unit Continued Specifications

OAE-FMA Connectors and Receptacles

Details OAE-FMA connectors for power, control, and RF receptacles.