Honeywell IFP-2100ECS - Section 2 Agency Listings, Approvals, and Requirements; 2.2 Underwriters Laboratories (UL); 2.2.1 Requirements for All Installations; Section 3 Before You Begin Installation

How to Operate the Microphone:
1. Press the ECS Control button
2. Key the Microphone
3. Press the All Call button
How to Reset the ECS System
1. Press The Reset Button
Select 2 to Reset the Emergency system
ECS-LOC2100 Operating Instruction
For Live Message
Key the Microphone.
1. Press the All Call Key or select desired output area using select keys.
2. Deliver your verbal message.
For Pre-recorded Message
1. Select desired ECS Message Key 1-8.
• If ECS Control LED is on steady, the LOC has ECS Control.
• If ECS Control LED is Blinking, another LOC has ECS Control.