Honeywell LYNX Touch L5210 Series Programming Guide

Screen Display Function & Programming Options
- 16 -
Program System Settings
System Settings
System Settings
Choose from the following options:
Entry Delay 1 Entry Delay 1
Exit Delay Backlight Timeout
Quick Arm Quick Exit Restart Exit Time
Force Bypass Exit Warning Auto Stay Arming
Lack of Usage Notify Power-up in Previous
Display Alarm Cancel Display Exit Time
Cross Zone Delay
Cross Zone 1 Cross Zone 2
Entry Delay 1
30 Seconds
Entry Delay 1
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Entry Delay 2
30 Seconds
Entry Delay 2
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Exit Delay
60 Seconds
Exit Delay
45 Seconds
60 Seconds
90 Seconds
2 Minutes
Backlight Timeout
No
Backlight Timeout
No
30 Seconds
Quick Arm
Yes
Quick Arm
Yes
No
Quick Exit
Yes
Quick Exit
Yes
No
Restart Exit Time
Yes
Restart Exit Time
Yes
No
Force Bypass
No
Force Bypass
Yes
No
Exit Warning
Yes
Exit Warning
Always Enabled (not selectable)
Auto Stay Arming
Yes
Auto Stay Arming
Yes
No

Honeywell LYNX Touch L5210 Series Specifications

General

Brand	Honeywell
Model	LYNX Touch L5210 Series
Category	Security System
Language	English