Honeywell LYNX TOUCH L7000 SERIES - Operate Garage Door from LYNX Touch Control Panel

Home Automation
Garage Door Opener Operation
Garage Door Operation Screen
Button or Icon
Function
Edit
Used to modify description of Garage Door
Close in
Provides access to keypad used to set a specific period of
time (up to 12 hours and 59 minutes) before an open garage
door closes automatically. If programmed the time will also be
displayed.
Close at
Provides access to keypad used to set a specific time that an
open garage door closes automatically. If programmed the
time will also be displayed.
Back
Used to return the control to the Garage Door list.
Press to open
Indicates Garage Door is Closed. Select to Open Garage
Door.
Press to close
Indicates Garage Door is Open. Select to Close Garage
Door.
Operate Garage Door from LYNX Touch Control Panel
Notes:
• When the garage door is open, “Ready to Arm – Fault” is displayed in a yellow band at the top of the display.
• If a “Close in” or “Close at” time has been programmed, the garage door will always operate as programmed until the
selection has been cleared.
Step
Action
1.
At the Garage Door operation screen, select the Opened or Closed Garage Door icon to Close or Open the door.
2.
When the door position has changed the icon will switch from Opened to Closed, as applicable, and CLOSED or
OPENED is displayed
- 19 -