17
AND PROVIDE ISNTRUCTIONS FOR THE PRODUCT IN THE APPROPRIATE
LANGUAGE, COVERING ALL THE REQUIREMENTS OF THE EN 795:2012, type B
and EN 795:2012, type A.
PRODUCT COMPATIBILITY WITH OTHER PPE (HARNESSES, ANCHORS AND
CONNECTING DEVICES): ENSURE THAT THE PPE YOU HAVE PURCHASED
IS COMPATIBLE WITH THE RECOMMENDATIONS OF OTHER FALL ARREST
SYSTEM COMPONENTS AND THAT THEIR SAFETY FUNCTIONS DO NOT
INTERFERE WITH ONE ANOTHER.
A full body harness must be the only appropriate device for holding the body. It
must comply with EN 361. In case of working in suspension, full body harness
must also comply with EN 813.
11 LIST OF PRODUCTS CONCERNED (see picture in part I)
DuraHoist Anchorage System – Complete Offer of Products:
Product name: Fig.: Note:
DuraHoist Arm + Port Base +
Ext 0.8m
Fig. A Mobile Anchor Device
Combination of:
DuraHoist Arm +
DuraHoist Arm Extension 0.8m +
DuraHoist Arm Portable Base
DuraHoist Arm Fig. B Mobile Anchor Device – Upper part
(offset 0,4-0,65m)
DuraHoist Arm XL Fig. C Mobile Anchor Device – Upper part
(offset 0,65-0,9m) – not to be used
with DuraHoist Portable Base
DuraHoist Arm Extension
1.4m
Fig. D Lower post length 1,4m
DuraHoist Arm Extension
0.8m
Fig. E Lower post length 0, 8m
DuraHoist Arm Portable Base Fig. F Portable attachment for DuraHoist
Arm and Extension (width between
legs 1-1,7m)
DuraHoist Arm Floor Base
Galva
Fig. G Attachment for DuraHoist Arm and
Extension – to be mounted on floor
DuraHoist Arm Floor Base SS Fig. H Stainless steel version of attach-
ment for DuraHoist Arm and Exten-
sion – to be mounted on floor
DuraHoist Arm Wall Base
Galva
Fig. I Attachment for DuraHoist Arm and
Extension – to be mounted on wall
DuraHoist Arm Wall Base SS Fig. J Self-retracting Lifeline
Max. weight load limit 136kg
To Next Page
Loading...
