TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT
3 63-2676—03
CONFIGURATION
OPTIONS
1. System Application Configuration
a. 1 Heat/1 Cool Conventional
b. 1 Heat without fan
c. 1 Heat with fan
d. 1 Cool only
e. 1 Heat /1 Cool Heat Pump
f. 2 Heat / 1 Cool Heat Pump
g. 4 pipe fan coil
h. 2 pipe fan coil (no reheat, manual changeover only without pipe sensor, automatic
changeover with pipe sensor)
i. 2 pipe fan coil with reheat (reheat, manual changeover only without pipe sensor, auto-
matic changeover with pipe sensor)
j. PTAC 1 Heat/1 Cool – Hi and Lo fan speeds
k. PTAC 2 Heat/1 Cool – Hi and Lo fan speeds
2. Programmable or Non-Programmable Mode
a. Thermostat can be configured as a 7-day programmable thermostat. In the program-
mable schedule mode, an override button is available for temporary override control.
The default override time can be configured through the installer setup.
b. Thermostat can be configured as a non-programmable thermostat. Remote setback
feature is available in the non-programmable mode.
3. Preoccupancy Purge
a. This feature is available only when the thermostat is configured as a programmable
schedule and when a fan is used. The fan will run 1-3 hours before the occupied
schedule starting time to circulate air.
4. Remote Setback
a. Remote Setback is available in the non-programmable mode. Occupancy sensors,
manual time clock inputs, and DDC night setback can be used to provide inputs to set-
back the thermostat. Unoccupied heating and unoccupied cooling setpoints are avail-
able to configure the setback setpoints.
5. Lockout
a. Lockout configurations are optional and can provide restrictions on access to setpoint,
system, schedule, and fan changes.
THERMOSTAT MODELS AND FEATURES
a
When configured for heat pump or PTAC operation, an additional stage of heat is available.
OPTIONS
A. TEMPERATURE
SENSORS
(REMOTE):
TR21, TR21-A, C7189U, C7772, other 20K ohm sensors.
B. OTHER
ACCESSORIES:
209651A Vertical Mounting Hardware Wallplate Adapter (Trident white).
TG511, TG512 Universal Versaguard™ Thermostat guards.
Table 2. TB7100A1000 Thermostat Features.
Model Applications
Maximum Stages
FeaturesHeat Cool
TB7100A1000
Conventional or Heat Pump
1
a
1
Remote Outdoor or Indoor sensor