To Next PageTo Next Page
Need help?Do you have a question about the Honeywell MultiPRO TB7100A1000/U and is the answer not in the manual?
General| Programmability | 7-Day Programmable |
|---|---|
| Power Source | Hardwired |
| Operating Modes | Heat, Cool, Off |
| Fan Modes | Auto, On |
| Hold Function | Yes |
| Filter Change Alert | Yes |
| Type | Programmable Thermostat |
| Compatibility | Multi-stage heating and cooling systems |
| Stages | 2 Heat / 2 Cool |
| Voltage | 24V |
| Terminal Designations | R, W, Y, G, O/B, C |
| Display | Backlit |
| Temperature Range | 40°F to 90°F |
| Changeover | Auto or Manual |
| Battery Backup | No |
| Weight | 0.5 lbs |
Highlights key functionalities and design aspects of the thermostat.
Details thermostat components, electrical ratings, and temperature/humidity limits.
Lists acceptable setpoint ranges and default energy-saving settings.
Describes indications, accuracy, finish, and battery types.
Provides guidance on obtaining replacement products.
Lists resistance values for various remote sensors.
States calibration is not required and describes mounting procedures.
Emphasizes careful reading and safety during installation.
Advises on selecting an optimal location for thermostat installation.
Details how to detach and mount the wallplate.
Highlights electrical hazards and general wiring guidelines.
Explains how to identify terminals and connect wires.
Defines the purpose of each terminal on the thermostat.
Illustrates wiring for single and dual transformer conventional systems.
Shows diagrams for heat-only and cool-only configurations.
Illustrates wiring for single-stage heat pumps with/without auxiliary heat.
Details wiring for 4-pipe and 2-pipe fan coil units.
Shows wiring for PTAC units with different fan speeds.
Outlines methods for supplying power to the thermostat.
Explains how to connect the common wire for 24 Vac power.
Provides guidance on installing optional remote temperature sensors.
Details wiring guidelines and safety for indoor sensors.
Shows how to wire multiple sensors for averaging.
Explains how to configure the thermostat's date and time.
Guides users through setting the calendar and clock upon initial power-up.
Explains how to navigate to the installer setup menus.
Lists installer setup numbers, names, and default settings.
Details available settings and provides specific notes for each ISU.
Covers deadband adjustment and temperature display units.
Details daylight saving configuration and remote sensor input settings.
Explains override options and unoccupied setpoint settings.
Configures fan reset behavior and minimum compressor off time.
Sets heating/cooling range stops and clock display format.
Manages keypad access and temperature control ramp rates.
Adjusts temperature display and restores factory defaults.
Describes tests for heating, cooling, and fan operation.
Explains fan operation modes and system control settings.
Details how to set up daily heating and cooling schedules.
Guides on modifying existing schedules and setting the current time.
Describes fan control based on installer settings and system type.
Explains how the thermostat controls various HVAC system types.
Details how the thermostat energizes terminals based on demand.
Details operational sequences for fan coil units.
Outlines operational sequences for PTAC units.
Covers preoccupancy purge and temporary override features.
Explains manual temperature overrides and holiday settings.
Shows how fan status is indicated and how to replace batteries.
Step-by-step guide for replacing thermostat batteries.
Explains how the thermostat displays remote sensor temperatures.
Describes how to lock the screen and the different lockout levels.
Explains how the thermostat manages temperature changes automatically.
Details the timer that prevents rapid compressor cycling.
Describes how to operate and check remote temperature sensors.
Addresses problems with the display not coming on or settings not changing.
Covers issues where heating or cooling fails to operate correctly.
Details troubleshooting for fan issues and simultaneous equipment operation.
Solves issues with incorrect equipment mode or setting conflicts.
Provides information regarding perchlorate material in the battery.
