Need help?Do you have a question about the Honeywell NOTIFIER PSE-10E and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Brand | Honeywell NOTIFIER |
| Model | PSE-10E |
| Output Voltage | 24 VDC |
| Output Current | 10 A |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
Lists the essential features and capabilities of the PSE power supply units.
Outlines the sequential steps required for the initial installation and commissioning of the PSE.
Covers wiring configurations for Notification Appliance Circuits (NACs), including Class B and Class A.
Outlines specific installation and wiring requirements for Canadian applications per ULC standards.
Details the global control options selectable via the S1 DIP switch settings on the power supply.
Details the DIP switch settings for controlling individual output circuit functions and operations.
Indicates various trouble conditions occurring on individual output circuits.
Details the Form-C trouble relay for monitoring various system-wide faults and conditions.
Describes the relay that signals AC power loss or brownout conditions to the FACP.
Details how to calculate system current draw for both non-alarm and alarm conditions.
Provides guidance on selecting and locating appropriate batteries for system standby and alarm.
Emphasizes the importance of regular testing and servicing of the power supply for reliability.
Shows how to use a control module for sync follower operation with NACs, tracking sync signals.
Details a Canadian two-stage application using the XP6-C multi-module for enhanced control.
To Next Page
