Need help?Do you have a question about the Honeywell HPFF12 and is the answer not in the manual?
Warning regarding radio frequency energy emissions and compliance with FCC rules.
Statement on digital apparatus noise emissions not exceeding Class A limits.
Recommendation to download the most current software version for product upgrades.
Information on how to provide feedback for improving documentation accuracy.
Explains the function and operation of HPFF power supplies and supervision.
Details the capabilities and specifications of the HPFF power supply models.
Step-by-step guide for configuring, installing, and wiring the power supply.
Describes the function of the Charger Disable and Ground Fault Disable jumpers.
Explains the meaning of various LED indicators on the control PCB.
Lists technical details such as power, input/output, and contact ratings.
Instructions for mounting the standard and FACP cabinets and backboxes.
Details on mounting HPFF12CM units within Fire Alarm Control Panel cabinets.
Guides for configuring NAC circuits in Class B, Class A, and mixed configurations.
Instructions for mounting control and relay modules onto the circuit board.
Guidelines for separating and routing power-limited and non-power-limited wiring.
Table detailing features programmable via DIP switch SW1.
Explains input/output functions, synchronization types, and alarm modes.
Lists supervised functions and field wiring considerations for trouble detection.
Details trouble contacts, LED indications, and reset procedures for various faults.
Describes wiring for controlling all four NACs from one FACP input.
Explains how to silence NAC outputs using addressable modules.
Guides for programming Split Alarm and Selective Silence modes for NAC pairs.
Instructions for interconnecting multiple HPFF units to expand NAC capacity.
Guide to calculating the required AC branch circuit current for system operation.
Instructions for calculating system current draw in standby and alarm conditions.
Steps to calculate required battery size (AH) for standby and alarm times.
Details on wire resistance and voltage drop limits for NAC circuits.
Lists compatible addressable control and relay modules from various manufacturers.
Lists compatible 24 VDC notification appliances from multiple manufacturers.
To Next Page
General
