Honeywell HPFF8 - User Manual

Power Products
HPFF8(E)/HPFF8CM(E)
Notification Appliance Circuit Expander
Instruction Manual
Document 53499 Rev: B4
10/1/2018 ECN: 18-476

Honeywell HPFF8 Specifications

General

Brand	Honeywell
Model	HPFF8
Category	Extender
Language	English

Summary

Installation Precautions and Warnings

CAUTION: System Re-acceptance Test

Ensures proper system operation after programming or system changes.

FCC Warning Statement

Information regarding RF energy emissions and compliance with FCC rules.

Canadian Regulatory Requirements

Compliance information for digital apparatus with Canadian regulations.

Software Downloads Information

Documentation Feedback Process

Standards and Compliance Information

NFPA Standards Reference

List of essential NFPA standards for system installation and operation.

Underwriters Laboratories Documents

List of UL standards for fire protective signaling systems.

Other Applicable Codes

Includes NEC articles and local building codes.

Honeywell HPP Documents

List of Honeywell's product compatibility and adapter documents.

Section 1: System Overview

1.1 General System Description

General description of the HPFF8 power supplies and their function.

1.2 Key Unit Features

Highlights key features of the HPFF8 power supply unit.

Start-up and Jumper Configuration

1.3 Step-by-Step Start-up Procedure

Step-by-step guide for initiating system operation.

1.4 Jumper Functions and Settings

Description of jumpers on the control circuit board and their functions.

System Overview Details

1.4.1 Charger Disable Jumper (J1)

Function of the J1 jumper for disabling the battery charger.

1.4.2 Ground Fault Disable Jumper (J2)

Function of the J2 jumper for disabling ground fault detection.

1.5 LED Status Indicators

Explanation of status LEDs on the control PCB.

1.6 Technical Specifications

Technical specifications for the HPFF8 power supply.

Section 2: Installation Guide

2.1 Backbox Mounting Instructions

Instructions for mounting the backbox of the unit.

2.2 Chassis-Mounting in FACP Cabinets

2.3 Chassis-mounting in CAB-4 and EQ Cabinets

2.3.1 CAB-4 Series Cabinets

Mounting details for HPFF8CM modules in CAB-4 cabinets.

2.3.2 EQ Series Equipment Cabinets

2.4 NAC Circuit Wiring

2.4.1 Four NACs Class B (Style Y)

Wiring diagram for four NACs in Class B (Style Y) configuration.

2.4.2 Two NACs Class A (Style Z)

NAC Wiring Configurations

2.4.3 Mixing Class B and Class A NACs

Wiring for mixed Class B and Class A NAC configurations.

2.4.4 HPP31076 Optional Class A Adapter

Installation of the optional adapter for Class A NAC circuits.

2.5 Mounting Addressable Modules

2.5.2 Six-Circuit Module Mounting

2.6 Power-Limited Wiring Requirements

2.6.1 Standard Chassis Power-Limited Wiring

2.6.2 FACP Cabinet Power-Limited Wiring

Section 3: Programming Options

3.1 DIP Switch Settings Overview

Guide to configuring features using DIP switch settings.

Programmable Features

3.2.1 Input;Output Functions

Determining input to output functions for NACs.

3.2.2 Synchronization Type

Selecting synchronization types for notification appliances.

3.2.3 AC Failure Trouble Delay

Configuring delays for AC failure trouble reporting.

3.2.4 Split Alarm and Silencing

Section 4: Trouble Supervision

4.1 Supervised Functions and Field Wiring

Functions supervised and field wiring requirements.

4.2 Trouble Reporting

Details on how troubles are reported by the system.

4.2.1 Normal;Standby Trouble States

Trouble reporting states during normal operation.

Trouble Reporting Details

4.2.2 Alarm Trouble States

Trouble reporting states during an alarm condition.

4.2.3 TB2: AC FAIL Contacts

Function of TB2 AC Fail contacts for reporting.

4.2.4 TB2: TROUBLE Contacts

Function of TB2 TROUBLE contacts for fault reporting.

4.2.5 TB3: Initiating Device Inputs

Supervision of TB3 inputs by FACP.

4.2.6 Trouble Memory Function

How the unit stores and indicates past troubles.

Trouble Detection Mechanisms

4.2.7 Ground Fault Detection

Mechanism for detecting ground faults in the system.

4.2.8 NAC Overload Protection

Protection and indication for NAC circuit overloads.

Section 5: Applications

5.1 Single Source NAC Control

Application for controlling four NACs from one FACP input.

5.2 Four NAC Control and Silencing

5.3 Split Alarm and Selective Silence

5.3.1 Selective Silence Configuration

Application for selective silencing of NAC pairs.

5.3.2 Split Alarm Mode Operation

5.4 Connecting Multiple HPFF Units

Section 6: Power Supply Requirements

6.1 Calculation Overview

Overview of calculating power supply currents and battery requirements.

6.2 AC Branch Circuit Current Calculation

Procedure for determining the required AC branch circuit current.

6.3 System Current Draw Calculation

6.3.1 Current Draw Calculation Overview

Explanation of calculating non-alarm and alarm current loads.

6.3.2 How to Calculate System Current Draw

Detailed steps and tables for calculating system current draw.

6.4 Battery Size and Wiring Requirements

6.4.1 NFPA Battery Requirements

NFPA 72 requirements for standby and alarm battery duration.

6.4.2 Battery Selection and Location

Guidance on selecting and placing appropriate batteries.

6.5 NAC Circuit Loop Wiring Requirements

Requirements for NAC circuit loop wiring resistance and current.