1 About this guide
This document describes the procedures to install, configure, and operate the Field Device Access Point
(FDAP1/FDAP2) and Field Device Access Point Gen3 (FDAP Gen3). FDAP is one of the components in the
OneWireless Network solution for industrial control.
Intended audience
This guide is intended for people who are responsible for planning, administering, and operating the
OneWireless Network. These people include Plant Managers, Process Engineers, and System Administrators.
Prerequisite skills
It is assumed that you are familiar with the operation of OneWireless Network, Experion system software, and
the plant processes which Experion controls, Microsoft Windows operating systems, and network
administration tasks.
How to use this guide
This guide provides guidance on:
• FDAP description
• FDAP installation
• FDAP configuration
• FDAP monitoring
• FDAP maintenance and troubleshooting
Required Honeywell documentation
The following documents and sources contain additional information required for deploying OneWireless
Network. It is recommended to have these documents readily available for reference.
This document provides
information about planning,
designing, and setting up the
OneWireless Network using
WDM, FDAPs, and field
devices.
This document describes the
procedures to provision,
configure, operate, and
monitor an ISA100 Wireless
field device network using
Wireless Device Manager
(WDM).
To Next Page
Loading...
