Honeywell Performance Series Configuration Guide

HPXD2 1080P HQA/TVI/AHD/CVBS Pin-hole
Camera
Configuration Guide
Follow the instructions in this guide to configure your camera.
Configuring Your Camera’s Settings
When the camera is connected to a Performance Series HQA DVR, you can configure the
camera’s settings using the camera’s on-screen display (OSD) menu.
To configure the camera’s settings:
1. Connect the camera to a Honeywell Performance Series HQA DVR and log on as the
admin user.
2. Right-click to display the shortcut menu, then click Camera Menu. The Menu Operation
window opens.
3. Click Enter to display the camera’s OSD menu.
4. To configure the camera, in the Menu Operation window, click the up/down arrows to
move through the menu list, click the left/right arrows to change a menu setting, or click
Enter to enter a submenu ( ) or execute a command.
5. After you have finished configuring the camera, scroll down to Exit, and then click Enter
to exit the OSD menu. Right-click to close the Menu Operation window.
OSD Menu Tree
Note: When the VIDEO OUTPUT is set to CVBS, Korean, Chinese and Japanese are not available in Language
option.
1st Level
2nd Level
3rd Level
4th Level
Format
NTSC
Confirm/Cancel
PAL
Confirm/Cancel
Video
Mode
1080p @30/25
Confirm/Cancel
720p@30/25
Confirm/Cancel
Backlight
Mode
OFF
HLC
LEVEL
1-100
BACK
BACK/SAVE
BLC
LEVEL
Middle/High/
Low
AREA
POSITION/SIZE
BACK/
AGAIN
DEFAULT
BACK
BACK/SAVE
WDR
LEVEL
1-5
BACK
BACK/SAVE
Image
Adjust
SHARPNESS
0-10
BRIGHTNESS
1-80
SATURATION
0-100
GAMMA
USER/0.45/0.5/
0.55/0.6/0.65/
0.7/0.75/0.8/
0.85/0.9/0.95/1
2DNR
LOW/MIDDLE/
HIGH/OFF
3DNR
LOW/MIDDLE/
HIGH/OFF
BACK
BACK/SAVE
Exposure
MODE
AUTO
MANUAL
SHUTTER
1/25(30);1/50(60);
1/120(100);
1/200(240);
1/400(480);
1/1000;1/2000;
1/5000;1/10000;
1/50000/
X2/X4/X6/X8/X10/
X15/X20/X25/X30
BACK
BACK/SAVE
LEVEL
1-80
GAIN
1-15
SLOW SHUTTER
AUTO
SENS-UP
X2/X4X/X6/X8/X10/
X15/X20/X25/X30
OFF
BACK
BACK/SAVE
BACK
BACK/SAVE

Honeywell Performance Series Specifications

General

Brand	Honeywell
Model	Performance Series
Category	IP Camera
Language	English