Honeywell HBW4PR2 User Manual

Honeywell | Performance Series
Performance Series IP Cameras
Software Configuration Guide
Recommended Find the latest version of this and other Performance Series IP camera
documents on the Honeywell Video website. Go
to:
http://www.honeywellvideo.com/products/cameras/ip/index.html
to find your camera and view/download the latest documentation.
Refer to the Honeywell Open Technology Alliance to learn more about
our open and integrated solutions (go
to:
http://www.security.honeywell.com/hota/).
H2W2PRV3
HBW2PR1
HEW2PR2
H2W4PRV3
HBW2PR2
HEW2PRW1
H4W2PRV2
HBW4PR1
HEW4PR2
H4W4PRV2
HBW4PR2
HEW4PR3
H4W4PRV3
HEW2PR1
HEW4PRW3

Honeywell HBW4PR2 Specifications

General

Model	HBW4PR2
Type	IP Camera
Focal Length	2.8 mm
Ingress Protection	IP67
Storage	MicroSD Card Slot (up to 128GB)
Night Vision	Up to 30 meters
Video Compression	H.264, MJPEG
Operating Temperature	-30°C to +60°C
Power Supply	PoE (802.3af) or 12V DC
Connectivity	10/100 Ethernet
Storage Temperature	-40°C to 70°C (-40°F to 158°F)

Summary

2 Getting Started

Installing the ConfigTool IP Utility

Instructions for installing the Config Tool IP utility on your PC for camera setup.

Discovering Your Device on the Network

Assigning a New IP Address to Your Device

Steps to assign a new static IP address to a device using Config Tool.

Upgrading Your Device's Firmware

Procedure to upgrade firmware for single or multiple devices.

3 Logging In and Viewing Live Video

Logging In to the Camera via the Web Client

Steps to log in to the camera using the web client.

Installing the Browser Plug-In

5 Configuring Camera Settings

Conditions

Profile Management

Zoom and Focus

Video Configuration

Configure video bit stream settings like compression, resolution, and frame rate.

Snapshot

Path

Configuring Network Settings

TCP/IP and Connectivity

Configure IP settings, P2P access, and network connection parameters.

Dynamic DNS and Remote Access

Configuring Storage Settings

Recording and Snapshot Schedules

Configure recording and snapshot schedules, including holidays.

Storage Path and Control

6 Configuring Events and Alarms

Configuring Motion Detection Settings

Enable and configure motion detection regions, sensitivity, and area.

Configuring Camera Tampering Settings

Enable video tamper and defocus detection functions and set working periods.

Configuring System Events Settings

Configuring Alarms

Alarm Configuration Interface

7 Troubleshooting

File Playback and Firmware Upgrade Issues

Camera Performance Issues

8 Camera Specifications

Ball Camera Specifications (HEW Series)

Detailed specifications for HEW2PR1, HEW2PRW1, HEW4PR3, HEW4PRW3 Ball Camera models.

Bullet Camera Specifications (HBW2PR1/HBW4PR1)

Detailed specifications for HBW2PR1 and HBW4PR1 Bullet Camera models.

Micro Dome Camera Specifications (H2W2PRV3/H2W4PRV3)

Detailed specifications for H2W2PRV3 and H4W2PRV3 Micro Dome Camera models.

Mini Dome Camera Specifications (H4W4PRV3)

Detailed specifications for H4W4PRV3 Mini Dome Camera models.

Mini Dome Camera Specifications (H4W2PRV2/H4W4PRV2)

Detailed specifications for H4W2PRV2 and H4W4PRV2 Mini Dome Camera models.

Bullet Camera Specifications (HBW2PR2/HBW4PR2)

Detailed specifications for HBW2PR2 and HBW4PR2 Bullet Camera models.