Honeywell HBW4PR2 User Manual

Configuring Events and Alarms
61
Configuring Illegal Access Event Settings
You can specify how many unsuccessful login attempts can be made before the system triggers an
illegal access alarm.
Figure 6-11 Illegal Access Configuration Interface
1. Click Enable to trigger an alarm when someone tries to illegally access the camera.
2. Enter the number of times a user can attempt to log in. Select from 3 to 10.
3. Click Email to send an email to a specified receiver if someone attempts to illegally access the
camera.
Configuring Alarms
Click the Alarm tab to open the alarm configuration interface.
Figure 6-12 Alarm Configuration Interface

Honeywell HBW4PR2 Specifications

General

Model	HBW4PR2
Type	IP Camera
Focal Length	2.8 mm
Ingress Protection	IP67
Storage	MicroSD Card Slot (up to 128GB)
Night Vision	Up to 30 meters
Video Compression	H.264, MJPEG
Operating Temperature	-30°C to +60°C
Power Supply	PoE (802.3af) or 12V DC
Connectivity	10/100 Ethernet
Storage Temperature	-40°C to 70°C (-40°F to 158°F)