To Next PageTo Next Page
Need help?Do you have a question about the Honeywell HEW2PRW1 and is the answer not in the manual?
General| Resolution | 1080p |
|---|---|
| Field of View | 110° |
| Night Vision | Up to 30 meters |
| Weather Resistance | IP66 |
| Power Supply | 12V DC, PoE |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Lens | 2.8mm fixed lens |
Highlights the main features of the Performance Series IP cameras, including camera and storage capabilities.
Step-by-step guide for installing the Honeywell ConfigTool IP utility on a PC for camera management.
Guide on how to update the firmware for single or multiple camera devices.
Steps for logging into the camera's web interface to monitor live video and configure settings.
Explanation of the Live View interface layout and its controls for monitoring video.
Instructions on how to play back recorded video files using the playback controls.
View and adjust camera property information, such as brightness, contrast, and exposure.
Configure video compression, resolution, frame rate, and bit rate settings for main and sub streams.
Configure TCP/IP settings including IP address, subnet mask, and gateway.
Add or remove schedules for recording and snapshots with different recording modes.
Configure user accounts, roles, and permissions for system access.
Manage user accounts, enable anonymous login, and modify user properties.
Procedure for upgrading the camera's firmware.
Set up motion detection parameters, including area, sensitivity, and recording.
Configure camera tampering detection (Video Tamper and Defocus Detect).
Configure alarm types, operations, and alarm tone settings.
