To Next PageTo Next Page
Need help?Do you have a question about the Honeywell HBW2PR2 and is the answer not in the manual?
General| Protection | IP66 |
|---|---|
| Resolution | 1920x1080 (Full HD) |
| IR Distance | Up to 30m |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Power Supply | 12 VDC ± 25%, PoE (802.3af) |
| Video Compression | H.264, MJPEG |
| Night Vision | Yes |
| Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
Provides an overview of the main features of the Performance Series IP cameras.
Details the main features of the Performance Series IP cameras.
Displays the dimensions and main components/connectors of each camera.
Guide to installing the Config Tool IP utility on your PC.
Instructions on using Config Tool to discover IP devices on the network.
Steps to assign a new static IP address to a device using Config Tool.
Procedure for upgrading camera firmware for single or multiple devices.
How to open the web client for individual camera settings from ConfigTool.
Instructions for logging into the camera using its web client.
Details on the four areas with controls and options for monitoring live video.
Describes playing back recorded video and saved snapshots on specific camera models.
Guide on how to search for and play recorded video files.
Explains how to use Playback Assistant buttons for zoom and snapshots.
Steps for clipping and saving sections of recorded video during playback.
Instructions on how to search for, view, and download snapshot files.
View camera property information and apply configurations.
Configure video settings using Normal, Full Time, or Schedule modes.
Adjust focal length and image definition for motorized zoom/focus cameras.
Settings for video bit stream, including codec, resolution, and frame rate.
Set up motion detection regions, sensitivity, and recording parameters.
Enable and configure video tamper or defocus detection functions.
Configure settings for events like No SD Card, Disconnection, or IP Conflict.
Configure alarm types, operation settings, and alarm tone prompts.
Troubleshoot issues with playing downloaded video files.
Resolve problems setting frame rates when using an Embedded NVR.
Address issues related to poor IR video quality or illumination.
Troubleshoot issues encountered during firmware upgrades.
Resolve problems with installing or logging into the web client.
Detailed specifications for HEW2PR1, HEW2PRW1, HEW4PR3, HEW4PRW3 Ball Cameras.
Detailed specifications for HBW2PR1 and HBW4PR1 Bullet Cameras.
Detailed specifications for H2W2PRV3 and H2W4PRV3 Micro Dome Cameras.
Detailed specifications for HEW2PR2 and HEW4PR2 Ball Cameras.
