OperatingManua/
Program schedule override: commercial use
Pressto activate"occupied"mode
MCR32969
Press to change temperature
MCR32970
Pressto set Pressto Pressto
"hold"time cancel begin"hold"
"hold"
Press A or y to change the
temperature, it will be maintained until
the "hold" time you set.
Press OVERRIDE to use a pre-set
"occupied" temperature if a person is
present during an unoccupied period.
The new temperature will be main-
tained for at least 1 hour, and can be
adjusted up to the maximum time set
by the installer. To change the time,
press the HOLD UNTIL arrow buttons.
The programmed schedule will resume
when the override timer expires. To
cancel the override at any time, press
CANCEL HOLD.
69-2498EFS--01 10
To Next Page
Loading...
