About your new thermostat
Your new thermostat is pre=programmed and ready to go. Just check the settings
below and change if needed:
1. Set date and time .................................................................................. See page 4
2. Select fan setting .................................................................................. See page 5
3. Select system setting ........................................................................... See page 6
4. Program schedules: Preset for maximum cost savings ............. See pages 7-10
5. Set humidification & dehumidification controls ................... Seepages 17-19
ONE-TOUCHTEMP CONTROL:Youcan overridethe programscheduleatanytime,and manually
adjust thetemperature(seepages9-10).
He p:
FOr assistance please visit httP:ilyouthome,honeywelLcom, or call to!!-free:
1=800-.468_1502 (if product !S used in a home)
1=888:245=1051 (if product is used in a workp!aoe)
Read and save these instructions,
® U.S. Registered Trademark.
Copyright ® 2011 Honeywell International Inc.
All rights reserved,
To Next Page
Loading...
