* flashes when the compressor protection is engaged (see page 3).
Temperature
The ambient (measured)
temperature is normally
displayed. To view the
setpoint temperature, press
or once. The setpoint
temperature will appear for
5 seconds.
Replace batteries
(see page 14)
Setpoint indicator
Appears when the setpoint
temperature is displayed.
Time
Current period number
Appears when the thermostat
is following the schedule (see
temporary override on page
14 and permanent override on
page 15)
Day
Heating is on
Cooling is on *
Replace filter
(see page 14)
To Next Page
Loading...
Need help?
General
