Installation Instructions
69-2109EFS—05 8
Changing the Tune
Operate the push. While the Icon is flash-
ing, press the button. Press the
button again and the tune will change.
Repeat until the tune you want plays.
Recall Function
A short push of the l button will flash
the Icon that was last in use.
Chime Sounds
To hear the chime sounds without oper-
ating the bell push, press the button.
Press the button again and the tune will
change.
Mount the Push
Mount using either the double-sided
adhesive pad or the screws provided.
(See Fig. 6 )
Test your push before mounting. Avoid
mounting to metal
structures.
Fig. 6
To Next Page
Loading...
Need help?
General