EasyManua.ls Logo

Honeywell RDWL313A2000 - User Manual

Honeywell RDWL313A2000
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Home
RDWL313A2000
Installation and Operation Guide
Portable Wireless Doorbell
Preparation
Doorbell
Push
Button
Wall
Anchors
Round Head
Screws
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6 mm) drill bit
4 AA alkaline batteries
Doorbell Wall
Mounting Bracket
Push Button Mounting
Bracket
and Adhesive Pad
To install you will need
In the box you will find
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see “Connect a Push Button” on page 5.
CR2032
Battery

Table of Contents

Questions and Answers

  • M
    micheleramirezJul 27, 2025
    Why is the range reduced on my Honeywell RDWL313A2000 Accessories doorbell?
    • S
      Stacy BeckerJul 27, 2025
      If the range of your Honeywell Accessories doorbell is reduced, avoid mounting the doorbell or push button on or near metal structures, as metal structures including uPVC door frames can reduce the range. You can also try moving the doorbell closer to the push button. Weak batteries can also reduce the range, and in cold conditions (below 41ºF [5ºC]), batteries may need to be replaced more often.
  • K
    Kristen MitchellAug 3, 2025
    What to do if the LED on the side of my Honeywell Accessories doorbell turns on?
    • W
      Whitney AndersonAug 3, 2025
      If the LED on the side of your Honeywell Accessories doorbell turns on, replace the doorbell batteries with 4 new AA alkaline batteries.
  • B
    Brandy ThompsonAug 12, 2025
    How to fix a Honeywell RDWL313A2000 Accessories doorbell that does not work?
    • K
      Kimberly LivingstonAug 12, 2025
      If your Honeywell Accessories doorbell does not work, ensure that the correct batteries (4 AA alkaline cells, 1 CR2032) are installed with the correct polarity. The doorbell might also be out of range; try the doorbell in a different location. You may also need to reconnect the doorbell.
  • K
    katieharringtonAug 19, 2025
    What to do if my Honeywell RDWL313A2000 doorbell makes two beeps after the tune?
    • A
      aaron57Aug 19, 2025
      If you hear two ‘beep’ sounds after the normal tune on your Honeywell Accessories doorbell, replace the push button battery with a new CR2032.

Summary

Preparation

Contents and Tools

Lists items included in the box and tools required for installation.

Overview and Safety

Initial Setup Steps

Basic steps to get the doorbell operational.

Safety Precautions

Essential safety precautions for installation and tool usage.

Install Batteries

Setup and Operation

Change the Tune

How to select different doorbell ringtones.

Setup and Operation Details

Customize Lights and Volume

Adjusting doorbell light flash patterns and audio volume.

Installation Guidelines

Doorbell Installation

Mounting the Doorbell Unit

Instructions for securely mounting the main doorbell unit.

Push Button Installation

Mounting the Push Button

Guidance on attaching the push button to a surface.

Accessories

Connecting Additional Sensors

Steps to pair motion sensors and extra push buttons.

Secret Knock Setup

Maintenance and Notifications

Battery Maintenance

Information on battery replacement and expected lifespan.

Low Battery Indicators

How to identify when doorbell and push button batteries are low.

Reset Procedure

Specifications

Troubleshooting

Warranty Information

Regulatory Compliance

FCC Regulations

Compliance details with Federal Communications Commission rules.

IC Regulations

Compliance details with Industry Canada regulations.

Honeywell RDWL313A2000 Specifications

General IconGeneral
TypeWireless Doorbell
Power SourceBattery
Volume LevelsAdjustable
Wireless Frequency433 MHz
ColorWhite
MaterialPlastic
Compatible WithHoneywell wireless doorbells
Mounting TypeWall mount
Product TypeDoorbell

Related product manuals