RT10A Rugged Tablet 19
Remap a Button or Key
You can change the default function of the Left Scan, Right Scan, or Camera
buttons as well as the Back, Recent, Home, and Search virtual buttons.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key Remap.
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual buttons.
5. Tap OK.
6. Select one of the following options:
•Tap Keys to view available functions. Select the function you want assigned
to the button.
•Tap Apps to view available applications. Select the application you want
assigned to the button.
•Tap Actions to enter an Intent or Broadcast. Tap OK to assign the action to
the button. For example, to send a Broadcast,
android.intent.action.MASTER_CLEAR, or to start an Intent,
com.android.settings/com.android. settings.wifi.WifiSettings.
•Tap Text to type characters to display when the remapped key is pressed. Use
a comma “,” to separate the characters. Tap OK to assign the text to the
button. Examples are listed below:
New text message or multimedia
message
Bluetooth is turned On.
Error with text or multimedia message
delivery
SD card is full
New email Wi-Fi network connected with full
signal strength
Computer is connected to a PC with a
USB cable
WiFi network connected but no signal
strength
Synchronizing data Error with sync or sign-in
Computer is connected with Ethernet
Icon Description Icon Description
To Next Page
Loading...
