Honeywell RTH2410B1001 - Install Batteries and Thermostat

Programmable Thermostat RTH2410
11
1) Install 2 AAA
batteries on the
back of the
thermostat.
2) Align the two
brackets on the
top of the
thermostat with
the corresponding
slots on the top of
the wallplate.
3) Push the
thermostat
against the
wallplate.
4) Tighten the screw
at the bottom of
the thermostat.
5) Turn power back
on at the heating/
cooling system.
u
Install Batteries and Thermostat
11.
69-2382ES-01 (RTH2410 5-1-1 QIG) ENG USA.fm Page 11 Monday, October 19, 2009 3:59 PM