Quick Installation guide
2
1) Turn power off at the heating/cooling system.
2) Remove old thermostat, but leave wallplate with
wires attached.
MERCURY NOTICE: Do not put your old
thermostat in the trash if it contains mercury in a
sealed tube. Contact your local waste
management authority for instructions regarding
recycling and proper disposal.
o
Remove Old Thermostat
2.
Do not remove wallplate yet.
69-2382ES-01 (RTH2410 5-1-1 QIG) ENG USA.fm Page 2 Monday, October 19, 2009 3:59 PM
To Next Page
Loading...
