Honeywell RTH2510 Series User Manual

Operating Manual
69-2725ES—02 8
Select the fan setting
Set the FAN switch to Auto or On.
In “Auto” mode (the most commonly used
setting), the fan runs only when the heating
or cooling system is on.
Ifsetto“On,”thefanrunscontinuously.
Set FAN switch to choose whether the fan
runs continuously or only as needed.
M33612
Heat Off Cool Auto On
Fan
Heat Off Cool
Auto On
Fan
Set
Hold
Run
69-2725ES_A.indd 8 5/4/12 11:03 AM

Honeywell RTH2510 Series Specifications

General

Display Type	Digital
Programmable	Yes
Power Source	Battery
Battery Type	AA Alkaline
Number of Batteries	2
Temperature Control	Digital
Compatibility	Single Stage Heating and Cooling Systems
Stages	1 Heat/1 Cool
Voltage	24V
Temperature Range	40°F to 90°F (4°C to 32°C)
Programming Options	7-Day, 5-2 Day
Display	Backlit
Weight	0.5 lbs (227 g)