Honeywell RTH2510 Series - Temporary Schedule Override

RTH2510/RTH2410
13 69-2725ES—02
About your new thermostat
Temporary
Set
am
70
6
:
30
M33602
Set
Hold
Run
Set
am
75
6
:
30
M33603
Set
Hold
Run
Program schedule override (temporary)
Press s or t to immediately adjust the
temperature. This will temporarily override
the temperature setting for the current time
period.
“Temporary” will appear on the display.
The new temperature will be maintained
only until the next programmed time period
begins (see page 9).
To cancel the temporary setting at any time,
press RUN.
Press to temporarily adjust temperature.
Press to cancel temporary setting and
resume program schedule.
Note: Make sure the thermostat is set to the
system you want to control (heat or cool).
69-2725ES_A.indd 13 5/4/12 11:03 AM