69-1722 16
Troubleshooting Tips
If . . . Then . . .
Display is
blank.
Check that fresh AAA alkaline batteries
are installed as marked on the battery
holder.
Temperature
settings do
not change.
Check that the temperature settings are:
• Heating 40°F to 90°F(4.5°C to 32°C).
• Cooling 50°F to 99°F (10°C to 37°C).
Heating
system does
not turn on.
• Set the system to Heat by pressing
the System button.
• Check the heat temperature setting to
be sure it is set above the room
temperature and “Heat On” shows
solidly in the display.
• Check the circuit breaker to be sure it
is not tripped.
• Check power switch at heating and/or
cooling system to be sure it is on.
• Check the furnace door to be sure it is
closed securely.
• Wait five minutes for the heating
system to respond.
• If all of this was checked, contact your
local heating and cooling contractor.
To Next Page
Loading...
