Honeywell RTH5160 Series User Manual

7
RTH5160 Series
15 Install batteries.
Insert two AA alkaline batteries in the back of the thermostat as shown.
16 Attach your thermostat.
Align the thermostat onto the UWP
and firmly snap it into place.
17 Turn your power ON.
Turn on the power at the breaker box
or switch that controls the heating/
cooling system.
OFF
ON
ON
OFF
ON
ON
Breaker box
Switch
OR

Honeywell RTH5160 Series Specifications

General

Display Type	Digital
Programmable	Non-Programmable
Power Source	Battery
Voltage	24V
Stages	1 Heat/1 Cool
Operating Modes	Heat, Cool, Off