Honeywell RTH8500WF Wi-Fi Series - Determine Heating;Cooling System Type

12
1.12 Determine your heating/cooling system type
Important! Heating/cooling system type must be set so that your thermostat
operates properly and does not damage your system.
1.12a If you have a traditional system (natural gas forced air with A/C), your
thermostat is set up by default to control this system.
Go to Step 2
1.12b If your system is:
 • Multistageequipment
 • Anytypeofheatpump
 • Hydronic
 • Other
 YouMUSTchangethesystemtypebysettingsystemfunction0170.
See “Setting functions and options” in the User Guide.
Not sure of your heating/cooling system type?
Refer to FAQ on wifithermostat.com/support