Honeywell RTH9585 - Disconnecting your Wi-Fi network; Reconnecting your Wi-Fi network

Disconnecting your Wi-Fi network
1 Touch
SETTINGS
.
2 Select
Wi-Fi
Setup
.
3 Touch
Disconnect
from
Network
. The
thermostat will display a question to
confirm your selection.
4 Touch
Yes
to confirm that you want
to disconnect from the network. The
thermostat will display the Wi-Fi Setup
screen.
5 Touch
OK
to display the menu.
Reconnecting your Wi-Fi network
1 Touch
SETTING
's.
HOME
;
\''
''lil
1•
SETTINGS
2 Select
Wi-Fi
Setup
.
3 Touch the name of the network you want
to use. The thermostat may display a
password page.
4
To
enter a password, touch characters to
spell out your home network password,
then touch
Done
.
5 The thermostat displays
"Connecting
to your network. Please wait
..
.
" then a
"Connection
Successful" screen.
6 Touch
Next.
• If
your thermostat
is
registered, you
will see your signal strength and other
status information. Touch
Done
.
• If the screen displays
"Register
Online
for Remote Access
,"
follow
instructions
on
page 13.
12
~
~--
~
~--
- -
---
~
.
v